New version of this page available at digitalfire.com: Click here to go now
PV Clay
Plastic Vitrox, Plastic Feldspar
Chemistry
Chemistry available on new site, see link above
Links to Other Materials
- FC-1 Filler Clay - Related
- Plastic Vitrox - Related
- Cache
Hazards
- Quartz, Crystalline Silica
Miscellaneous
- Family: Feldspar
- Region: North America
- Mined At: Unspecified
- Raw Mineral: No
- Generic: No
Notes
It is a feldspathic semi-abrasive mineral consisting of clay, mica, feldspar and silica (Moh hardness of 5). It is a product of the hydrothermal alteration of intrusive rhyolite and is mined from a substantial deposit in the Mojave Desert of California. In a ceramic casting slip or plastic clay body, PV Clay has the unique capability of promoting plasticity from the clay portion, fluxing action from the feldspar portion, and low shrinkage and stability from the non-plastic quartz portion.
Its relatively high potash and soda content give P. V. Clay a lower PCE than most kaolins and ball clays (18 vs. 26-35), and thus it has become widely used in the ceramic industry as a low temperature flux for artware and tile bodies. Its formula is quite similar to Cornwall Stone. It has the unique ability to promote plasticity, fluxing and stability all from the same material.
Its loss on ignition (approx 3% vs 10-15 for kaolins and ball clays) and its high silica content tend to impart low shrinkage, good density, and excellent hardness at low firing temperatures in the range 1900-2100F.
It has an ideal combination of feldspathic silicates and kaolinites that permit low temperature firing in high talc bodies with exceptional resistance to glaze crazing and dunting during cooling.
It fires white to impart outstanding casting properties to ceramic casting bodies and floor & wall tile bodies.
P.V. Clay is also used as a filler in rubber products, as a mild abrasive in polishes and cleansers, and as an extender for coatings, compounds, and other industrial products.
PV Clay is used in the "California Artware Body" as follows:
California Talc 3 parts
PV Clay 1 part
Ball Clay Blend 2 parts
This produces a casting body which casts quickly, has good dry strength, a light color and long firing range and resists crazing very well.
Firing properties are strongly influenced by the particle size (the finer the grade, the better vitrification achieved). P. V. clay can reach vitrification at cone 8, and is even used in glazes with success. A simple 50:50 mix of P. V. Clay and Gerstley Borate is used widely as a transparent glaze at cone 5-7.
The manufacturer claims that the material is maintained to constant uniformity chemically and physically by careful mining, close particle size control and cleanliness in milling and rigid laboratory control.
Particle Size Distribution
(typical Sedigraph Method)
40 91.0 (below 40 microns)
30 77.5
20 67.0
15 61.5
10 56.0
7.5 51.0
5 43.0
4 40.0
3 35.0
2 31.0
1 23.5
Mineralogical Analysis:
----------------------
Flint 46%
Feldspar 34%
Kaolinite 24%
Sulphur .03
LOI 2.3%
Specific Gravity 2.65
pH 9.2
Dry Brightness 82
Fired Brightness 80
Apparent Density
(lbs./ft3) 27
Tapped Density 66
Unfired Physical Properties:
Rate of Cast, Thickness 15 min
(specific gravity 1.5) 1.21 cm 1.27 cm 1.83 cm
Percent water of plasticity: 28 29 32
Percent dry shrinkage 4.2 4.4 4.8
Cone 03 Cone 5 Cone 8
---------------------- -------------------- --------------------
LOI 1.2 2.4 2.9 1.6 2.7 3.0 2.2 2.7 3.3
Absorption: 19.5 18.8 20.6 11.7 6.4 .6 6.0 .2 .1
Fire Shr: .5 1.0 1.0 5.2 8.1 10.7 8.0 9.9 10.1
MOR: 1051 1202 1807 3357 4482 6717 4812 6257 6900
Color light buff Brown Gray lt med med
grey gray gray
PCE Cone 18
Melting Point: 2700F
At one time, PC Clay was made by a wet milling process and was known to the trade as "Plastic Vitrox" from whence it derives its name.
Suppliers
- BFM Minerals
Authors
- Tony Hansen (Owner)
XML
Available on new site, see link above
Much more information with complete interlinking to many related Copyright 2003 http://digitalfire.com, All Rights Reserved Please support http://ceramicmaterials.info to improve this library |  |
INSIGHT is ceramic chemistry |